Úvod »Serva» GRAUPNER - DS 3781 BB, MG servo


        

GRAUPNER - DS 3781 BB, MG servo

skladem

 

běžná cena 3 199 Kč
naše cena bez DPH: 2 512 Kč
naše cena s DPH (21 %):
3 039 Kč

do košíku:
  ks  
Miniservo 27g s kovovými převody. Tah 3,5 kg/cm, rychlost 0,07s/40st při 4,8 V, provozní napětí 4,8-6 V, rozměry 33x15x26,5mm.




Product information

Race-grade metal gears, twin ballraces and metal output  shaft Specially developed for ultra high-speed models; the perfect choice when maximum possible transit speed and precision are required. Fitted with a high-power coreless motor, digital IC electronics and a practical lead just 100 mm long.

New digital servos

GRAUPNER/JR digital servos have now been used successfully all over the world, and the comprehensive expertise built up by the JR company combined with the development power of the Mitsubishi laboratories have paved the way to further improvements to the digital micro-processors used in these servos. These digital servos feature re-designed micro-controllers with their own intelligence, allowing them to check the control signals and calculate compensation where necessary, e.g. for defective signals, thermal drift and other parameters which can disturb the servo. Super start-up torque in response to even the tiniest deviation More powerful MOS-FET bridged output stages for improved maximum load 13-bit 5,900-step ACD system for ultra-precise neutral setting and smooth movements at all times Twin ballraced output shaft for minimum friction and guaranteed accuracy High pulse frequency ensures high torque whilst protecting the motor.

Specification

Torque at 4.8 V (Ncm) approx. 30
Torque at 6.0 V (Ncm) approx. 35
Holding moment at 4.8 V (Ncm) approx. 67
Holding moment at 6.0 V (Ncm) approx. 88
Transit speed at 4.8 V (sec. / 40°) approx. 0.07
Transit speed at 6.0 V (sec. / 40°) approx. 0.06
Weight g approx. 26
Gearbox** MG
Bearings* 2 x BB
Dimensions (LxWxH) approx. 33 x 15 x 26,5 mm

*PB --> Plain Bearing
BB --> Ball Bearing
**PG --> Plastic Gearbox
Rounded up to 0.5 mm
PGCA --> Plastic Gearbox, Carbonite
MG --> Metal Gearbox

Velikost serva Mini
Typ serva digitální
Tah při 4.8V [kg/cm] 3.5
Rychlost při 4.8V [s/60st.] 0.07
Převody serva kovové
Kuličková ložiska 2xBB
Highvoltage ne
Napájení [V] 4.8 - 6
Délka [mm] 33
Šířka [mm] 15
Výška [mm] 26.5
Hmotnost [g] 27